To be able to use the QPACE programs you have to set up the variable QROOT and source a configuration file that contains all relevant settings in the following manner:

• bash

  $> export QROOT=/opt/qroot
  $> soure $QROOT/etc/env-admin.sh
  

• csh

  $> setenv QROOT /opt/qroot
  $> soure $QROOT/etc/env-admin.csh
  

To avoid cluttering the nodes' memory with logging messages, syslog is configured to use remote logging. All logging output goes to qmasterJ and qmasterW resp. and can be found in /var/log/nodes/nc-<BP>-<NC>.

Execute the following command: dcr w iwc 0 0 Check exception status using the command: cat /proc/gs